INKOMA SHG wiishka wiishashka degdega ah u qaadaya waxaa lagu yaqaanaa waxqabadkiisa firfircoon iyo adkeysigeeda, taasoo ka dhigaysa doorashada ugu sareysa macaamiisha u baahan hufnaan sare iyo nolol adeeg dheer. Waxaa lagu heli karaa afar cabbir, waxay dabooshaa culeyska u dhexeeya 1.5 t ilaa 9 t waxayna ku habboon tahay codsiyada u baahan culeysyo firfircoon oo sarreeya iyo wareegyo waajibaad dheeri ah.
Astaamaha:
- Awoodaha Qaadista: 15 kN ilaa 90 kN
- Xawaaraha Wadista: Wax-soo-gelinta ayaa xawaaraheedu gaarayaa 3000 rpm
- Nooca Iskiriimka: Is-quful trapezoidal screw (kubbad kubad ikhtiyaari ah ayaa la heli karaa)
- Saliid: Kala soocida wareegyada saliidda si aad u hesho waxqabad wanaagsan
- Mashiinku wuxuu ku xiraa saliidda dufanka
- Gears bevel leh saliid-qubeyska saliidda
- Saamiga Bevel Gear: Waxaa lagu heli karaa 2:1 iyo 3:1 saamiga
- Waarta: Kiis adag oo dhulka la jeexjeexay iyo shafka
- Hufnaanta: Gearsyada iligga laf-dhabarka ah waxay bixiyaan xawaare sare oo qaadis, hufnaan aad u wanaagsan, iyo nolol adeeg oo dheer
Taxanaha INKOMA SHG wuxuu bixiyaa isku darka saxda ah ee xawaaraha, adkeysiga, iyo waxqabadka firfircoon, taas oo ka dhigaysa mid ku habboon warshadaha halkaas oo waxtar sare iyo isticmaalka joogtada ah looga baahan yahay.
| Cabbirka (SHG) | 15 | 25 | 50 | 90 | |
| Max. awoodda qaadis firfircoon / taagan | [kN] | 15 | 25 | 50 | 90 |
| Max. culeyska kacsanaanta firfircoon / taagan | [kN] | 15 | 25 | 50 | 90 |
| Isku dubaridka Tr | 24×5 | 35×8 | 40×7 | 60×9 | |
| Saamiga N | 2:1 | ||||
| Kor u kacaankiiba saamiga N | [mm/per dib u eegis.] | 2.5 | 4 | 3.5 | 4.5 |
| Saamiga L | 3:1 | ||||
| Kor u kacaankiiba saamiga L | [mm/per dib u eegis.] | 1.66 | 2.67 | 2.33 | 3 |
| Max. awoodda wadista2) at T = 20 °C Wareegga shaqada (ED) 20%/saacaddii | [kW] | 1 | 1.5 | 2.4 | 8.9 |
| Max. awoodda wadista2) at T = 20 °C Wareegga shaqada (ED) 10%/saacaddii | [kW] | 1.3 | 2.6 | 3.8 | 13 |
| Sixir qiimaynta hufnaanta | [%] | 41 | 43 | 37 | 33 |
| Qulqulka qulqulka ugu badnaan | [Nm] | 29.4 | 73.2 | 123.4 | 398.5 |
| Ugu badnaan | [Nm] | 50 | 125 | 175 | 1600 |
| Daqiiqad weyn oo inertia J Saamiga N nooca 1 | [kg cm2] | 1.058 | 6.63 | 22.44 | 181.28 |
| Daqiiqad weyn oo inertia J Saamiga N nooca 2 | [kg cm2] | 1.079 | 6.79 | 22.89 | 184.92 |
| Daqiiqad weyn oo inertia J Heerka L nooca 1 | [kg cm2] | 0.677 | 3.6 | 7.248 | 123.79 |
| Daqiiqad weyn oo inertia J Heerka L nooca 2 | [kg cm2] | 0.691 | 3.67 | 7.393 | 126.28 |
| Qalabka guryaha | EN-GJL-250 | G-AlSi10Mg | EN-GJL-250 | ||
| Miisaan la'aan dhererka istaroogga iyo tuubada ilaalinta | [kg] | 9 | 13.5 | 23 | 85 |
| Ku dheji miisaanka 100 mm istaroogga | [kg] | 0.8 | 0.59 | 1.5 | 2.5 |
| Qadarka saliidda ee qalabka gooryaanka | [kg] | 0.15 | 0.9 | 0.6 | 3.5 |
